|
A special evaluator is not required, since the contact mat or safety mat DIN EN 292-1 is composed of electro-mechanical break contacts, the signal of which can im-mediately be further processed. In addition to cost saving, any expensive connection and wiring actions are unnecessary. Valuable space is won on the crowded control panel. Further, of course, a not existing device cannot go defective.
safety mat DIN EN 292-1: Actuation will commence at low actuating forces and after a very short response travel, providing a fast response time. The full remaining height of the rubber profile is available as an over-travel. In particular with regard to the prevention of injuries, large over-travels are of enormous importance for safety mat DIN EN 292-1. Our safety mat and safety mat DIN EN 292-1 meet the requirements of category 3 of EN 954-1 - even the sen-sor part. Double-channel design or redundancy is not necessary for this safety mat DIN EN 292-1 - system, since the failure mode analysis made by BG has shown: a single fault does not lead to a loss of the safety function. This permits a simple construction of the system. The contact chain-type safety edge in a correspondingly designed configuracion meets category 3 of EN 954-1 – even he sensor part. A model meeting highest category 4 is also available. Double-channel design or redundancy is not necessary for this system, since the failure mode analysis made by the German test house BG has shown: a single fault does not lead to a loss of the safety function. This permits a simple construction of the system. |
safety mat DIN EN 292-1safety mat DIN EN 292-1 safety mat access sensing hazardous areas safety mat category 3 EN 954-1 safety mat DIN EN 292-1 protection devices with approach reaction attendance control hazardous area safety shutt-off mat contact mat HSM safety mat saftey mat fixation bar pressure mat automation automotive warehouse machines industry plant facility hall mechanical engineering outdoors outside plant engineering car manufacturing indoors inside indoor use outdoor use assembly shop factory building storage room storage place |